ADVERTISEMENT
Make sure the garments are ready: After the damaged garment has been turned inside out, it should be placed on the ironing board with the hole toward the outside of the garment.
Destroy the Web of Bonding: After cutting a little piece of fusible bonding web, make sure that it is slightly bigger than the hole that you are fixing.
To make the hole vanish, you will need to align and bond it by gently pushing both sides of the hole together. The fusible bonding web should be placed over the hole, and then wax paper should be placed over it.
Introduce Heat: A “wool” setting should be selected on your iron, and then it should be placed on top of the wax paper. For around ten seconds, you should not move or push it while holding it in place.
Examination and Repetition: In order to inspect the mended hole, turn the garment so that it is facing inward. Should it be necessary, you may use your fingers to further plug the hole. To ensure that the restoration is completely smooth, repeat steps 3 and 4.
You may need to practice the approach a few times before you are able to perfect it, but you will quickly realize that the hole is no longer visible.
Final Thoughts
You no longer need to have any prior experience with sewing in order to confidently fix those pesky holes in your garment at this point. If you follow these simple measures and preventative advice, you will be able to prolong the life of your favorite clothing and ensure that they continue to appear as good as new.
ADVERTISEMENT
